Causes and solutions for empty sheets on Folder gluer machine

Gluing machine equipment is the final process of carton forming, which has a crucial decision for the quality of the product, in addition to the operator is a test  experienced operators can effectively improve the quality and efficiency of raw So gluing machine in the actual operation process, gluing machine empty sheet problem how to deal with it

  　   The problem of empty sheets in the gluing machine is caused by a variety of factors and the common reasons are as follows

  　   1. The quality of the cardboard itself is too light or there is too much curly paper powder, etc. will cause the empty sheet phenomenon

  　   The solution: simply increase the weight of the paper or sort out the cardboard, while flattening the cardboard and shaking off the paper powder can be a good solution

  　   2. The quality of the cardboard is too light, the stack is not high enough, the operator does not put the cardboard and thus the friction of the equipment is not enough to appear empty sheets

        Solution: The operator only needs to increase the cardboard regularly

  　   3. The angle of the support bar of the gluing machine is too high, resulting in the cardboard not being able to make good contact with the equipment, thus appearing empty sheets

        Solution: Just adjust the height of the support bar and keep it at the right height.

  　   4. Due to the aging of the belt of the gluer, the phenomenon of slippage occurs.

　　 Solution: The belt needs to be brushed to increase its surface roughness or to increase the air-jet device to solve the problem.