The right way to debug the box Folder Gluer?

Folding Gluing machine is a kind of intelligent equipment used for folding and gluing boxes, and its debugging is very important. The correct commissioning method can ensure the quality and efficiency of the box folding and gluing.

Adjust the width of the gluing baffle so that its two sides are parallel. Put down the semi-finished color box, both sides of the side baffle is less than 1mm from the color box within. Then adjust the restraining bolts to ensure that each product to be glued passes through smoothly without paper jamming. This step is to ensure that the box can pass through the gluer smoothly.

Adjust the slope and height of the stand for the box to be glued area. So that the product to be glued can advance smoothly. Adjust the auxiliary off guide and runner according to the back, mainly the size is suitable for the specifications of the color box to be glued. This step is to ensure the stability and smoothness of the box when running in the folder gluer.

Double-check the size and shape of the box and determine the gluing glue to be used and get it ready. This is basic preparation to ensure that the right glue for the box is used.

Next, adjust the width of the folding knife so that it aligns with the press line. This is to ensure that the box will fold correctly and stay flat in the folder gluer.

Finally, you may find that you need to look at the belt pressure at various positions if the paper is not going in the right direction. This process can be handled with the experience of the machine operator to deal with the problem. This is a delicate adjustment that needs to be operated according to the specific situation.

In short, the correct debugging method of the folder gluer is very important. Only a properly commissioned gluer can ensure the quality and efficiency of the boxes. Each step needs to be carefully operated to ensure the normal operation of the folder gluer. Only in this way, can we meet the customer's efficient, stable product demand.