folder gluer factory tells you about solutions to common problems with folder-gluers

The folder gluer factory tells you that problems will inevitably occur in the folder-gluing machine during the process of gluing and gluing boxes. You can only try your best to do maintenance work in daily life to improve the performance of the equipment. If there are problems, you should first find out the cause and then find the corresponding solution. solution.

Some common problems may occur during the use of the folder-gluer machine. The following are some solutions provided by the folder-gluer machine factory:

The paste temperature is unstable: It may be because the temperature controller in the paste tank is faulty. It is recommended to check the settings and connections of the thermostat and ensure that the temperature in the paste tank is stable within an appropriate range.

The folder-gluing machine is running unstable: It may be because the internal parts of the machine are worn or loose. It is recommended to check whether the various parts of the machine, such as transmission belts, bearings, etc., are normal, and replace or adjust them in time.

The paste flow rate is too large or too small: the paste pump or pipeline may be blocked or damaged. It is recommended to clean the paste pump and pipeline, check whether there is any damage, and replace it if necessary.

The speed of the folder gluer is unstable: it may be due to motor failure or speed controller problems. It is recommended to check the connection between the motor and speed controller and repair or replace it in time.

The above are solutions to some common problems of the folder-gluer machine. If you encounter other problems, it is recommended to contact the folder-gluer manufacturer or after-sales service department in time for processing.