Folder gluing machine debugging and operation method

1、Check the work order and sample carefully, determine the glue used and prepare it;

2. Adjust the competing degree of the gluing baffle. Both sides should be parallel. Then adjust the restriction bolts to make sure that each product to be glued passes smoothly without any stumbling phenomenon;

3 Adjust the slope and height of the support for the box to be glued. So that the products to be glued can go forward smoothly without the phenomenon of untangling, and then adjust the auxiliary guide and flow wheel. Make its size suitable for the specification of the color box to be glued;

4. Adjust the gluing belt and the gluing guide, then adjust the gluing host and wheel off pressure, and the cross fit of the belt;

5. Adjust the gluing cylinder and check whether the glue of the glue cylinder is sufficient, the glue water should be submerged in 980% of the glue wheel for the declaration, then adjust the glue cylinder and the glue position;

6, turn on the power switch, the main motor switch and vibration on/off key, machine adjustment after the operation of "or inch move key, in the "to the paper key debugging machine, and check whether the machine performance is abnormal, skewed phenomenon should be corrected immediately;

7、After the debugging ok, test machine 5-10 sheets, confirm the position and forming specifications after the debugging machine speed;

8、When gluing the box, pay attention to the state of gluing the paper, not to exceed the line, offline or misalignment, so as not to affect the appearance of the color box and molding effect;

9、First confirm: strictly in accordance with the first piece of signed samples;

10、After production, clean up the box folder gluer machine and keep it clean.