Specifications of the fully automatic high-speed intelligent 4&6 Corner Folder Gluer and solutions for the horn mouth problem in the folding gluing machine

Specifications of the New Luolan fully automatic high-speed intelligent 4&6 Corner Folder Gluer:

- Machine dimensions: L16×W1.65×H1.6m, indicating the length of the machine is 16 meters, width is 1.65 meters, and height is 1.6 meters.

- Machine net weight: 8 tons, representing the weight of the machine itself.

- Maximum speed: 400 meters/minute, denoting the maximum operational speed of the machine.

- Total power: 36.4 kW, indicating the total power of the machine used to drive its functions and equipment.

These specifications provide basic information about the New Luolan folding gluing machine in terms of dimensions, weight, speed, and power. This information can help businesses understand the equipment capabilities and characteristics for selection and usage. Kind reminder: For specific issues or operational details, it's recommended to contact New Luolan's professional pre-sales or after-sales team for more accurate technical support and guidance.

The horn mouth problem in the folding gluing machine may cause the cardboard to fold and bond incorrectly. Here are some possible solutions:

1. Machine adjustment and calibration: Check the adjustments and calibration of the folding gluing machine to ensure the correct operation parameters and settings according to the operation manual or production guide.

2. Inspection of the cardboard feeding system: Check the operation of the cardboard feeding system to ensure normal entry of cardboard into the machine without accumulation, shortage, or abnormal supply.

3. Adjustment of adhesive application: Check the supply and application system of the adhesive to ensure even distribution and adjust the viscosity according to the cardboard material and requirements.

4. Adjustment of folding section: Check the folding section of the folding gluing machine, including the position, angle, and pressure of the folding plate to ensure correct folding and alignment.

5. Cardboard quality and handling: Check the quality of the cardboard used and its handling process to ensure smoothness and suitability, including die-cutting and stacking, to prevent damage or deformation.

If the above methods do not resolve the horn mouth problem, it is advisable to contact the pre-sales or professional after-sales team of the folding gluing machine for further inspection and resolution. They can provide more accurate advice and solutions based on the specific situation.